Industrial IoT Information

Industrial IoT Information

IIoT

Home/Solution/System integration/Industrial IoT Information
Smart Remote I/O
Product Description

Smart Remote I/O is a network communication that integrates multiple controller manufacturers, according to the manufacturer’s network communication to correspond the defined virtual point to the control card I/O physical point device, easy to use, no need to install any software, no need to spend additional costs to convert into consistent third-party communication, and no need to cooperate with terminal block extension wiring, greatly reducing the complexity of the use of I/O modules. Each output point is protected and error detected, and there won’t be damage caused by incorrect connection, and the point where the problem occurs can be known through

Product Feature
  • Save the wiring time and be easy to detect the error to reduce manpower and maintenance costs.
  • European terminals are easy to install and. replace, saving plenty of wiring man-hours.
  • In the event of failure, it can be restored by replacing the card with the same IP to reduce the downtime.
  • Transistor output has no life problems and fast response, if used in communication to save cycle time.
  • I/O damaged caused by AC shock will not affect the PLC CPU.
  • The board volume is smaller than that of PLC with the same number of points.
WEB I/O Monitor
VIDEO Description
Smart Remote IO Demo with KEYENCE PLC
Smart Remote IO Demo with FANUC NC
Smart Remote IO Demo With PANASONIC PLC
Smart Remote IO Demo With OMRON PLC
Smart Remote IO Demo With Modbus TCP and WEB
Product Specification
左右滑動查看表單
電晶體型號LJ-SRIO-X32Y32 LJ-SRIO-X32Y32LJ-SRIO-X16LJ-SRIO-Y16
輸入電壓24 VDC ± 20%24 VDC ± 20%24 VDC ± 20%24 VDC ± 20%
輸入點數 PNP或NPN

透過COM改變
PNP或NPN

透過COM改變
PNP或NPN

透過COM改變
輸入形態 PNP或NPN(電晶體)

透過網頁設定改變
PNP或NPN(電晶體)

透過網頁設定改變
PNP或NPN(電晶體)

透過網頁設定改變
輸出電壓 32點16點16點
輸出形態 PNP或NPN(電晶體)

透過網頁設定改變
PNP或NPN(電晶體)

透過網頁設定改變
PNP或NPN(電晶體)

透過網頁設定改變
輸出最大電流PNP Mode : 500 mA

NPN Mode : 300 mA

High-Side : 1500 mA
PNP Mode : 1200 mA

NPN Mode : 810 mA

High-Side : 1200 mA
PNP Mode : 1200 mA

NPN Mode : 810 mA

High-Side : 1200 mA
輸出保護過電流、過電壓

短路(錯誤示警燈號)
過電流、過電壓、過溫度

短路(單獨錯誤示警燈號)
過電流、過電壓、過溫度

短路(單獨錯誤示警燈號)
電氣隔離方式2500 Vrms光隔離

2500 Vrms通訊隔離
2500 Vrms光隔離

2500 Vrms通訊隔離
2500 Vrms光隔離

2500 Vrms通訊隔離
2500 Vrms光隔離
安裝方式DIN-RailDIN-RailDIN-RailDIN-Rail
尺寸123mm×122mm×50mm

(長×寬×高)
123mm×122mm×50mm

(長×寬×高)
116mm×78mm×45mm

(長×寬×高)
116mm×78mm×45mm

(長×寬×高)
Swipe left and right
繼電器型號LJ-SRIO-RY8
輸入電壓24 VDC ± 20%

輸入點數 

輸入形態 

額定輸出耐壓32點

輸出形態 繼電器輸出

(1 CO SPDT)

額定輸出電流 10 A (MAX : 16A)

繼電器型號FINDER 43.41

電氣隔離方式2500 Vrms光隔離

6000 Vrms通訊隔離

安裝方式DIN-Rail

尺寸155mm×122mm×50mm

(長×寬×高)

Swipe left and right
繼電器型號LJ-SRIO-X4Y4-CE1LJ-SRIO-X8Y8-CE1
輸入電壓24 VDC ± 20%24 VDC ± 20%

輸入點數 4點8點

輸入形態 PNP或NPN

透過COM改變
PNP或NPN

透過COM改變

輸出電壓24 VDC ± 5%24 VDC ± 5%

輸出點數4點8點

輸出形態PNP或NPN

透過COM改變
PNP或NPN

透過COM改變

輸出最大電流PNP Mode : 1200 mA

NPN Mode : 810 mA

High-Side : 1200 mA
PNP Mode : 1200 mA

NPN Mode : 810 mA

High-Side : 1200 mA

輸出保護過電流、過電壓、過溫度
短路
過電流、過電壓、過溫度
短路

電氣隔離方式2500 Vrms光隔離

2500 Vrms通訊隔離
2500 Vrms光隔離

2500 Vrms通訊隔離

安裝方式DIN-RailDIN-Rail

尺寸90mm×54mm×61mm

(長×寬×高)
121mm×38mm×100mm

(長×寬×高)
Product Application
  • Auto Production Line
  • Collecting Data
  • Whole plant planning
  • Distributed control architecture
  • PLC remote I/O Record
Manual Download